Are you using bdcom networking devices, want to factory reset your devices. IF yes you are in the right place. BDCOM is a well-known brand for networking devices like OLT, ONU, Switch, Router specially PON (Passive Optical Network) products.
If are you struggling with how to reset bdcom olt or how to reset bdcom switch or you forgot your device’s password then have a look at this article
So stay tune
How to Reset BDCOM OLT / Switch
In this article we will cover reset bdcom olt and switch in 2 way
- Reset Olt/Switch using web interface CLI
- Factory Reset Olt/Switch using Console cable
Reset OLT / Switch Using web Interface
In this step, we will cover how to reset bdcom networking products using a web interface.
If you want to reset your product you must need to know the IP address and user name and password of your olt and switch.
Step 1: Reset OLT/Switch Using web interface
First, you have to log in to your OLT/ Switch via IP address with the browser.
If you cant log in have a look my another article on how to configure BDCOM EPON OLT
Then go to system Mgrand click to factory setting then restore and yes
Step 2: Reset OLT/Switch Using CLI
If you want to reset from CLI first you have to connect with your devices using Telnet or SSH.
In this step, we will use a software called putty.
After successfully login then put the below command and after that reboot the olt.
Bdcom Olt Reset Command
Switch>
Switch>ena
Switch#delete
this file will be erased,are you sure?(y/n)y
Switch#delete config.db
this file will be erased,are you sure?(y/n)y
Switch#reboot
Do you want to reboot the Switch(y/n)?y
Bdcom Switch Reset Command
Switch>
Switch>ena
Switch#delete
this file will be erased,are you sure?(y/n)y
Switch#delete config.db
this file will be erased,are you sure?(y/n)y
Switch#reboot
Do you want to reboot the Switch(y/n)?y
That’s all
Factory Reset Olt/Switch using Console cable
If you forgot the password of your devices and want to reset your switch / Olt ?
Then you need to get console access
Connect your PC to OLT Console port using Console cable. Console cable available at your OLT Packet. You need a USB TO Serial converter to connect.
To get the CLI interface of OLT needs to use software like putty. And make sure to select speed 9600
After accessing the olt using console cable just power off the devices and after a few seconds Power on the devices and continuously Pressing Ctrl + P keys.
After that OLT/ Switch will boot with Monitor mode.
Now there is two step
- If you just forget the password and dont want to reset the configuration just pur below command which will show the username and password
monitor#
monitor#show configuration
- If you want to make it default factory setting then just delete the configuration files also database files
monitor#
monitor#
monitor#delete
this file will be erased,are you sure?(y/n)y
no such file or file is protected!
monitor#delete config.db
this file will be erased,are you sure?(y/n)y
monitor#reboot
Do you want to reboot the Switch(y/n)?y
Please wait…
After reboot complete you OLT/Switch will boot the default configuration.
Now you need to enable ports using the below command
Switch>ena
Switch#Jan 1 00:01:14 User admin enter privilege mode from console 0, level = 15
Switch#config
Switch_config#interface range epON 0/1-8
Switch_config_if_range#no shutdown
Switch_config_if_range#exit
Switch_config#interface range tGigaEthernet 0/1-2
Switch_config_if_range#no shutdown
Switch_config_if_range#exit
Switch_config#interface range epON 0/1-8
Switch_config_if_range#no shutdown
Switch_config_if_range#exit
Switch_config#write all
Saving current configuration…
If you want to configure your device again, have a look at another article regarding how to configure BDCOM epon olt step by step.
Conclusion
If you follow the above process step by step you can successfully reset your devices. So now you already know how to reset bdcom olt/switch all processes.
Hope it will help you
Stay tuned with us for more useful articles like this
You May also like our latest articles about wireless routers according to your Needs